manualshive.com logo in svg

Atlona AT-OME-TX21-WP-E, Manual

Share
Download
Atlona AT-OME-TX21-WP-E Manual Download Page 28

AT-OME-TX21-WP-E

28

Info page

Model Name

 

The model SKU of this product.

Software Version

 

The version of firmware that the AT-OME-TX21-WP-E is running.  Always make sure to check the AT-OME-TX21-

WP-E product page, on the Atlona web site, for the latest version of firmware.

On-Time (h-m)

 

The time elapsed since the unit was last powered-on.  Turning the unit “off”, using the PWOFF command, will not 

reset this field.

RX Type

 

Indicates the type of receiver that is connected to the unit.

Active Input

 

The currently selected input.  Refer to the 

A/V Settings page (page 29)

 for information on changing the input.

Signal Type

 

Displays the input resolution of the source device.

Video Format

 

Displays the video format.

Aspect

 

Displays the aspect ratio of the input video source.

Color Space

 

Displays the color space of the input video source.

Color Depth

 

Displays the color depth of the input video source.

The Web GUI

System Info

Summary of Contents for AT-OME-TX21-WP-E















































Reviews:

No comments

Brands by name

Popular brands

Load more brands