Installation
33
PVL14OF-EXT
Figure 30 – Pneumatic Connection Diagram
7.14 Make The Electrical Hookup To The Power Unit
The hookup work must be carried out by a qualifi ed electrician.
Make sure that the power supply is right. Make sure the connection
of the phases is right. The power unit must be kept dry.
It is strictly forbidden to use 60Hz motor on 50Hz power supply.
Never operate the motor on the power less than 208V. Motor
damage may occur.
• Make the electric hookup to the hydraulic power unit referring to the wiring
diagram (fi g. 6);
• Make sure to install a proper circuit breaker on the circuit (DZ47-63/
D32A/2P is suggested for single phase 208-240V).
• Make sure the lift is grounded well.
