Atlas Copco SMARTROC D65 TIER 4 FINAL, Maintenance Manual

Page: 54 / 220

SmartROC D65 Tier 4 Final 5 RCS drilling system
54
Rig Sensors Wagon Frame Calibration
Rig Actuations
Rig Actuations Power Pack
Rig Actuations Wagon Frame
Rig Actuations Cooling fan
Rig Parameters
Rig Parameters Tramming
RHS
RHS Sensors
RHS Sensors Calibration
RHS Actuations Left Digital Lever
RHS Actuations Right Digital Lever
RHS Actuations Bit Breaker
RHS Parameters RHS
RHS Parameters Threading
RHS Parameters Length Sensor
RHS Cradle positions
RHS Auto RHS parameters
RHS Auto RHS parameters Feed Speed
RHS Auto RHS parameters Rotation
RHS Auto RHS parameters Times
Table 10: Menu structure
5.3 Settings
5.3.1 General and specific settings
The speed of the hydraulic cylinders is set separately for each cylinder. These menus have
a choice list from which you can choose the desired cylinder (boom extension, feed exten-
sion, etc.).
Pressure and flow settings for drilling are divided into a number of menus. Several of these
settings can be done specifically for different types of drill bit. The parameters that can
have different values for different types of drill bit are marked with a drill bit symbol. These
menus have a choice list from which the drill bit can be selected.