Atlas Copco QAS 275-325, Instruction Manual

Page: 17 / 114

- 17 -
S2 ....... Emergency stop button
Push the button to stop the generator in case
of an emergency. When the button is
pressed, it must be unlocked, before the
generator can be restarted. The emergency
stop button can be secured in the locked
position with the key, to avoid unauthorized
use.
S20 ..... ON/OFF switch
Position O: No voltage is applied to the
Qc1002™ module, the generator will not
start.
Position I: Voltage is applied to the
Qc1002™ module, it is possible to start up
the generator.
X25 ..... Terminal strip
Qc1002™ Module
The Qc1002™ module is located inside the control
panel. This control module will carry out all
necessary tasks to control and protect a generator,
regardless of the use of the generator.
This means that the Qc1002™ module can be used for
several applications.
Pushbutton and LED functions
Following pushbuttons are used on
the Qc1002™
Qc1002 CAN 145
ENTER: Is used to select and
confirm changed settings in the
Parameter list.
UP: Is used to scroll through the
display information and to adjust
parameter value upwards.
DOWN: Is used to scroll through the
display information and to adjust
parameter value downwards.
BACK: Is used to leave the Alarm
pop-up window, to leave the
Parameter list and to leave menu's
without change.
REMOTE MODE: Is used to
activate the remote mode. The LED
indicates if the gen-set is put in
Remote Mode.