Atlas Copco QAS 275-325, Instruction Manual

Page: 29 / 114

- 29 -
Parameter display
This view shows a number of Parameter settings and
gives access to them.
An overview is given in “Parameter list” on page 31.
Alarm list display
This view shows the number of active alarms and
gives access to them.
An overview is given in “Alarm Display (pop-up
window)” on page 36.
LOG list display
This view shows the alarm memory and gives access
to it.
An overview is given in “LOG list” on page 39.
Service timer 1 & Service timer 2
display
This view shows both Service timers. The service
timer indication is shown when service time has run
out. It can be removed by resetting the timers or
acknowledging the Service timer indication.
The service timer indications count upwards and give
an alarm when the set value is reached.
Resetting the Service Timers can be done through the
Parameter display.
Battery voltage display
This view shows the Battery voltage and the running
hours.
RPM display
This view shows the engine speed and the running
hours.
Coolant temperature display
This view shows the Coolant temperature and the
running hours.
See also “Parameter list” on page 31 for selection
between °C and °F.
Parameter
Alarm List
0 Alarm(s)
LOG List
Service 1
Service 2 59h
59h
25.2 V Battery
00168.1h
0 RPM
00168.1h
62˚C Water
00168.1h