manualshive.com logo in svg

Atlas Copco HiLight H6+ DC, Instruction Manual, Page: 48 / 116

Share
Download
Atlas Copco HiLight H6+ DC Instruction Manual Download Page 48

- 48 -

5.3

Maintenance of the 
alternator

The alternator does not require any specific general
maintenance. However, please follow the indications
in the Alternator Operation Manual that accompanies
the light tower.

5.3.1

Measuring the alternator 
insulation resistance

A 500 V megger is required to measure the alternator
insulation resistance.
If the N-terminal is connected to the earthing system,
it must be disconnected from the earth terminal. 
Refer to the Alternator operating and maintenance
instructions for more details.

5.4

Engine maintenance 
procedures

5.4.1

General instructions

– Regularly perform maintenance work and replace

parts as indicated in the Engine Operation
Manual. 

– The engine should never run before filters have

been correctly installed.

– Open the access doors of the light tower to access

the engine and perform all necessary maintenance
operations. 
• Unlock the access doors by using the key.
• Open the access doors by pushing the black

push button next to the key hole.

– Regularly check the controller display, to see if a

service alarm icon (1) is present. In this case an
urgent maintenance action is requested.

Example:

– Do not smoke and maintain a safe distance from

flames and sparks while maintenance is being
carried out and when fuels and solvents are being
used. 

– Carefully follow all the instructions contained in

the Engine Operation Manual that accompanies
the light tower.

1

00_00_HiLight H6+_EN.book  Page 48  Friday, June 4, 2021  11:52 AM

Summary of Contents for HiLight H6+ DC





















































































































Reviews:

No comments