manualshive.com logo in svg

Atlas Copco HiLight H6+ DC, Instruction Manual, Page: 38 / 116

Share
Download
Atlas Copco HiLight H6+ DC Instruction Manual Download Page 38

- 38 -

4.4.3.2

Active configuration

4.4.3.3

Front panel editor (FPE) / Auto Run 
icons

4.4.3.4

Mode icons

4.4.3.5

Light output icons

4.4.3.6

Alarm icons

To indicate the alarm that is currently active on the
controller, an icon is displayed in the Alarm Icon
section.
For an overview of all controller alarms, see chapter
“Solving Lc1003™ controller alarms” on page 58.

Display

Description

Appears when the main 
configuration is selected.

Appears when the alternative 
configuration is selected.

Display

Description

Appears when a remote start input 
is active

Appears when a low battery run is 
active

Appears when a scheduled run is 
active

Display

Description

Appears when the engine is at rest 
and the unit is in stop mode.

Appears when the engine is at rest 
and the unit is in auto mode.

Appears when the engine is at rest 
and the unit is waiting for a manual 
start.

Appears when a timer is active, for 
example cranking time, crank rest 
etc.

Appears when the engine is 
running, and all timers have 
expired, either on or off load.
The animation speed is reduced 
when running in idle mode.

Appears when the unit is in the 
front panel editor.

Appears when a USB connection is 
made to the controller.

Appears if either the configuration 
file or engine file becomes 
corrupted.

Display

Description

Appears when the corresponding 
light output has been configured 
and is not active.

Appears when the corresponding 
light output has been configured 
and is active.

Appears when a timer to delay the 
light output activating or de-
activating is in progress

00_00_HiLight H6+_EN.book  Page 38  Friday, June 4, 2021  11:52 AM

Summary of Contents for HiLight H6+ DC





















































































































Reviews:

No comments