manualshive.com logo in svg

Atlas Copco HiLight H6+ DC, Instruction Manual, Page: 28 / 116

Share
Download
Atlas Copco HiLight H6+ DC Instruction Manual Download Page 28

- 28 -

3.4

Connecting the light tower

3.4.1

Precautions for non-linear and 
sensitive loads

The most common non-linear loads are thyristor/
rectifier-controlled loads, such as convertors
supplying voltage to variable speed motors,
uninterruptable power supplies and Telecom
supplies. Gas-discharge lighting arranged in single-
phase circuits generate high 3rd harmonics and risk
for excessive neutral current.
Loads most sensitive to voltage distortion include
incandescent lamps, discharge lamps, computers, X-
ray equipment, audio amplifiers and elevators.
Consult Atlas Copco for measures against the adverse
influence of non-linear loads.

Non-linear loads draw currents with
high contents in harmonics, causing
distortion in the wave form of the
voltage generated by the alternator.

00_00_HiLight H6+_EN.book  Page 28  Friday, June 4, 2021  11:52 AM

Summary of Contents for HiLight H6+ DC





















































































































Reviews:

No comments