manualshive.com logo in svg

Atlas Copco HiLight H6+ DC, Instruction Manual, Page: 24 / 116

Share
Download
Atlas Copco HiLight H6+ DC Instruction Manual Download Page 24

- 24 -

5. Once the light tower is correctly positioned, install

a suitable earthing (e.g. the optional earth pin (7))
and make sure that it is correctly connected to the
light tower. 

For more detailed installation instructions, see also
“Installation” on page 27.

3.2.3

Positioning for transport

1. Make sure the mast is lowered completely and

turned 90° (1). See also “Lowering the mast” on
page 33.

2. Make sure that the jockey wheel (if available) is

safely fastened by its own locking lever to ensure
that the light tower is still stable once the
stabilizing feet are removed. 

3. Adjust the height of the support leg/jockey wheel

using the handle (2) on top. The support leg/
jockey wheel (3) should never touch the ground
once the light tower is coupled to the hook of the
towing vehicle. 

4. Retract the 4 feet (4) and the stabilizers and ensure

their locking pins following the reverse order of
the procedure described in “Positioning the light
tower” on page 23. 

7

1

3

4

2

00_00_HiLight H6+_EN.book  Page 24  Friday, June 4, 2021  11:52 AM

Summary of Contents for HiLight H6+ DC





















































































































Reviews:

No comments