Atlas Copco Dynapac F1000W T4i, Operation & Maintenance Manual

Page: 204 / 240

F 6.0 6
F_6.0_0
1_US.
fm 6-
12
Suction/return flow hydraulic filter (2)
Change the filter at the intervals specified or
when the maintenance indicator (A) is at
the red mark or when changing hydraulic oil.
When inspecting the maintenance indicator, the
hydraulic oil must be at least 175
°
F (80
°
C).
When changing the hydraulic oil also change the
filter.
- Remove the lid fastening screws (B)
and remove the lid.
- Disassemble the withdrawn unit into the follow-
ing parts:
- lid (C)
- separating plate (D)
- filter (E)
- dirt collection cage (F)
- Clean the filter case, the lid, the separating
plate and the dirt collection cage.
- Check and replace the O-rings (G) when re-
quired.
- Wet the seal surfaces and the O-ring with
clean fuel.
A
B
H
F
E
D
C
I
G