Atlas Copco Dynapac F1000W T4i, Operation & Maintenance Manual

Page: 141 / 240

D 4.0 11
D_
4.1_0
1_US.f
m 1
1-26
1.2 Transport Operation
Lifting and securing the screed
- Raise the screed using switch (52).
- Center the levelling cylinders using the switches (54)/(55).
The remote control must be connected and this function must be set to “Manual“.
- Raise the auger crossbeam using switches (47)/(48).
Engage both screed transport safeguards to secure the screed in the raised position.
Driving and stopping the paver
- Set the selector (21) for traction drive / engine to position 3.
- Set the preselector (12) for traction drive to approx. 50%.
- To start driving, carefully tilt the drive lever (20) forward or backward according to
the drive direction desired.
In case of an emergency, press the emergency stop button (40)!
- To stop the vehicle, move the drive lever (20) into its center position.
Switching off and securing the paver
- Lower the screed using switch (52).
- Turn off the engine by turning the ignition key (10) to the “0“ position. Pull the key
out of the switch.
The battery may become drained if the paver stands still for long periods of time even
though the ignition is not switched on.