Atlas Copco Dynapac F1000W T4i Operation & Maintenance Manual Download

Page: 130 / 240

D 3.0 8

3.0_0

1_US.f

m 8-8

Conveyor limit sensors

The ultrasonic conveyor limit sensors control the

material flow at the respective conveyor half.

The conveyors should stop when the material has

roughly reached the area below the auger tube.

NOTE:

This requires that the auger height has been ad-

justed correctly (see chapter E).

Ultrasonic auger limit sensors (left

and right)

The limit sensors control the material flow at the

respective auger half.

The ultrasonic sensor is mounted to the side

plate. Loose clamping lever for adjustment and

modify angle / height of the sensor.

The cables must be connected to the remote con-

trol units located at the sides of the screed.

NOTE:

Adjust the limit sensor positions while the material

is distributed.

Sockets 24V

Connect the working lights (24 V) or other devices

here.

Power is present when the main switch is

switched on.

NOTE:

As an option, one socket can be used to provide

power for accessories.

Sensor

Sockets

Summary of Contents for Dynapac F1000W T4i

















































































































































































































































Search results

Summary of Contents for Dynapac F1000W T4i

Reviews:

Related manuals for Dynapac F1000W T4i

Brands by name

Popular brands

Atlas Copco Dynapac F1000W T4i, Operation & Maintenance Manual

Search results

Summary of Contents for Dynapac F1000W T4i

Reviews:

Related manuals for Dynapac F1000W T4i

Brands by name

Popular brands