59
PPPoE/PPPoA
Set the PPP Connection as ones as the picture and insert the username and
password provided by ISP.
The same configuration can be used for PPPoA connection.
For this configuration, is necessary to change
Protocol
field from PPPoE to PPPoA (RFC2364, PPP over ALL5).
You have to pay particular attention to the WAN-ADSL
connection. If you have any doubt turn to qualified
personnel or contact Atlantis technical assistance. Atlantis
will not be considered responsible in case of wrong or bad
configuration.
For PPPoE connection, it might be possible that MTU value
is too high for DSL line. Please edit the field
MTU
to 1492
or low.