14
REPLA
CING
P
AR
T
S
4
Pull Pins
Pads
If the spring inside the pull pin mechanism
is not working properly or other parts are
missing, the entire pin needs to be changed.
It is important to note that the thread size of
the pull-pin’s insert changed sometime in
early 2004. As a result, replacement pull-pins
are shipped with two thread-sized nuts to
accommodate all equipment models. Once
the correct size has been identified, it is
extremely important that the pull pin head
(red) be glued using a thread locker (LOCTITE
Red Threadlocker).
Please contact our service department with
the following information relating to the
unit such as model number, serial number,
pictures and location of pad(s) on the unit so
that we may be able to assist you.
NOTE: Atlantis will evaluate if the foam
is still in good condition, and thus only the
upholstery needs to be changed.
If you need to replace a part that has not been listed in this manual, contact the service department
with the product code and serial number with a description of the part you need. You may be
required to provide additional information in order to help establish exactly which version of a part is
required such as pictures of the unit and of the part(s) in question.
Other parts
