4
These units are typically shipped fully assembled and ready to use. In some instances, units will be
“compressed” to save space for shipping and are assembled with shortened beams. It is important to
note that although the shortened beams are discarded after shipping, the hardware (bolts) must be
reused. If a pad has been removed for installation purposes, be careful not to over tighten the T-nut
bolts when reinstalling the pad on the unit. In order to do so, tighten the bolts by hand before using a
ratchet or impact driver.
Weight stack units are typically shipped fully assembled apart from
their weight stacks which are packed in boxes. It is important to follow
the diagram labeled on each machine to make sure that the proper
plates are installed.
Please note that the following units do not feature the 5 lb (2.3 kg) add-
on weights described within the installation instructions:
• C113 Total Hip
• M118 Standing Calf
• M318 Incline Calf Raise
• NM205 Dynamic Functional Training System
Racks, benches and plate-loaded units
Weight stack units
AS
SEMBL
Y
INSTRUC
TIONS
1
5 LB (2.3 KG) ADD-ON WEIGHTS
