6
6) Slide back the two add-on weights (G).
7) Push the rods back into place. Place
the black plastic bracket into position
and secure it to the frame with the
cylindrical bolts. Replace the “split” and
“flat” washers. (See p. 5, #2)
8) Slide each add-on weight up the
guide rod and twist it into the stored
position on the cylindrical bolt.
9) Put the weight sticker on each plate
as per diagram. NOTE: Fronts of
plates should be wiped with rubbing
alcohol before the stickers are
applied to remove surface oils and to
ensure proper adhesion.
AS
SEMBL
Y
INSTRUC
TIONS
1
Weight stack units:
Installing the weight stack
10) Put the shroud and front panel back.
WEIGHT STICKERS
(G) ADD-ON WEIGHT 5 LB (2.3 KG)
6
7
8
9
10
