MUTE: a mute/un-mute command will be sent to all channels. The display
backlight will flash once per second when muted.
Clip
:
Nothing.
Trigger
:
ON mode: system shuts down and display shows standby mode (see 1.2)
Off mode: nothing.
3.1.2 Analogue Input Sensitivity Menu
The analogue input sensitivity menu is shown when the SELECT button is pressed in the setup menu
with analogue input sensitivity menu as active sub-menu. The current value appears (in this example
+4.00dB). There are no sub-menus.
A
n
a
l
o
g
u
e
I
n
S
e
n
s
+
4
.
0
0
d
B
Actions
:
Rotary
:
UP/DOWN: change the analogue input sensitivity in steps of 0.25dB, with
a minimum value of +4dB and a maximum of +20dB.
Buttons
:
MENU: nothing.
BACK: the setup menu appears (see 3.1).
PRESET: If pressed briefly the current preset is displayed for two seconds. If
held for more than two seconds the preset menu appears (see 4).
SELECT: saves value and sends to all channels. Setup menu appears (see 3.1).
MUTE: a mute/un-mute command is sent to all channels. The display
backlight flashes once per second when muted.
Clip
:
Nothing.
Trigger
:
ON mode: system shuts down and display shows standby mode (see 1.2).
OFF mode: nothing
3.1.3 12V Trigger Mode Menu
The 12V trigger mode menu is shown when the SELECT button is pressed in the setup menu with 12V trig-
ger mode menu as active sub-menu. The current setting appears (this example shows the ON mode).
1
2
V
T
r
i
g
g
e
r
M
o
d
e
O
n
Sub-menu:
ON or OFF
Actions
:
Rotary
:
UP/DOWN: scrolls up/down through the sub-menu list.
Buttons
:
MENU: nothing.
BACK: the setup menu appears (see 3.1) .
PRESET: If pressed briefly the current preset is displayed for two seconds.
If held for more than two seconds the preset menu appears (see 4).
SELECT: saves setting and sends to all channels. The setup menu appears
(see 3.1). Note: Trigger must be attached to first channel.
MUTE: a mute/un-mute command is sent to all channels. The display
backlight flashed once per second when muted.
Clip
:
Nothing.
Trigger
:
ON mode: system shuts down and standby mode displayed (see 1.2).
OFF mode: nothing.
3.1.4 Channel Settings Menu
The Channel Settings menu is shown when the SELECT button is pressed in the setup menu with Channel
Settings menu as active sub-menu, or when the back button is pressed in main source menu, main trim
menu, LFE source, or LFE trim menu. The selected channel in the setup menu and selected alias appears
(in this example 1, Left Master). Which Channel Settings sub-menu option appears depends on the last
shown channel settings sub-menu option (in this example Main Source).
L
e
f
t
M
a
s
t
e
r
M
a
i
n
S
o
u
r
c
e
Summary of Contents for IB2S-A
Page 1: ...User Guide IB2S A Series TM Advanced Transmission Line ...
Page 2: ......
Page 45: ...ULTIMATE MONITORING ...
