SELECT: saves value and sends to all channels. The preset settings menu
appears
(see
4.1.2).
MUTE: a mute/un-mute command is sent to all channels. The display
backlight flashes once per second when muted.
Clip
:
Nothing.
Trigger
:
ON mode: system shuts down and the standby mode is displayed (see 1.2).
OFF mode: nothing.
4.1.2.4 Rear HF Shelf Menu
The Rear HF Shelf menu is shown when the SELECT button is pressed in the preset settings menu with Rear HF
Shelf as active sub-menu. The selected preset in the preset settings menu appears (1 in this example) along
with the current value (in this e1.00dB). There are no sub-menus.
1
:
R
e
a
r
H
F
S
h
e
l
f
+
1
.
0
0
d
B
Actions
:
Rotary
:
UP/DOWN: changes the rear LF Shelf in steps of 0.125dB. The minimum
value is -8.00dB and the maximum is +7.87dB.
Buttons
:
MENU: nothing
BACK: the preset settings menu appears (see 4.1.2)
PRESET: if pressed briefly the current preset is displayed for two
seconds. If held for more than two seconds the preset
menu appears (see 4)
SELECT: saves value and sends to all channels. The preset settings
menu appears (see 4.1.2)
MUTE: a mute/un-mute command is sent to all channels. The
display backlight flashes once per second when muted.
Clip
:
Nothing
Trigger
:
ON mode: system shuts down and the standby mode is displayed (see 1.2).
OFF mode: nothing.
Summary Table
The table on the following two pages summarises the menu structure of these control functions and associ-
ated displays, with reference to the notes below:
1.
Note that Aliases are assigned to speakers in the order that they are connected via the RJ45 In and
Thru sockets. The speaker connected directly to the remote control is aloways alias number 1.
2.
“Select” is the push button action of the rotary encoder.
3.
The Mute button mutes all channels, in which condition the display backlight flashes.
4.
For preset alias, select from alphabet/numerals using rotary encoder and click (up to 10 chars).
5.
XBD Main Source, Main Trim, LFE Source, LFE Trim would default to track Master setting
6.
Front LCR ganged. Rear surrounds ganged.
7.
Alias name of preset
8.
Defaults to volume level and channel clip display after no remote activity for >60 sec.
9.
If Trigger mode on, then the display shows “Awaiting Trigger” when the system is in standby. External
trigger signal on is required on 1st loudspeaker in the chain.
10.
Sets input level required to obtain rated output
Please Note that the final loudspeaker in the chain must have the loopback
connector fitted to the RJ45 Remote Thru socket.
!
Summary of Contents for IB2S-A
Page 1: ...User Guide IB2S A Series TM Advanced Transmission Line ...
Page 2: ......
Page 45: ...ULTIMATE MONITORING ...