Sub-menus
:
Main Source
Main
Trim
LFE
Source
LFE
Trim
Actions
:
Rotary
:
UP/DOWN: scrolls up/down through the sub-menu list.
Buttons
:
MENU: nothing.
BACK: the setup menu appears (see 3.1).
PRESET: If pressed briefly the display shows the current preset for two
seconds. If held for more than two seconds the preset menu appears (see 4).
SELECT: depends on sub-menu:
Main Source
: enter Main Source menu (see 3.1.4.1).
Main Trim
: enter Main Trim menu (see 3.1.4.2).
LFE Source
: enter LFE Source menu (see 3.1.4.3).
LFE Trim
: enter LFE Trim menu (see 3.1.4.4).
MUTE: a mute/un-mute command is sent to all channels. The display
backlight will flash once per second when muted.
Clip
:
Nothing.
Trigger
:
ON mode: system shuts down and display shows standby mode (see 1.2).
OFF mode: nothing.
3.1.4.1 Main Source Menu
The Main Source menu is shown when the SELECT button is pressed in the Channel Setting menu with Main
Source as active sub-menu. The selected channel in the channel settings menu appears (in the example
below, Channel 1). Which Main source sub-menu option appears depends on the current main source (in
this example, Analogue In). Note: When Master Only Mode is not set the XBD cabinets settings are copied
over from the master cabinets settings.
C
h
1
M
a
i
n
S
o
u
r
c
e
A
n
a
l
o
g
u
e
I
n
Sub-menus
:
Analogue In, Main AES3 Left, Main AES3 Right.
Actions
:
Rotary
:
UP/DOWN: scroll up/down in the sub-menu list.
Buttons
:
MENU: nothing.
BACK: the channel settings menu appears (see 3.1.4).
PRESET: If pressed briefly the current preset is displayed for two seconds. If
held for more than two seconds the preset menu appears (see 4).
SELECT: saves setting and sends to selected channel. The channel settings
menu appears (see 3.1.4).
MUTE: a mute/un-mute command is sent to all channels. The display
backlight flashes once per second when muted.
Clip
:
Nothing.
Trigger
:
ON mode: system shuts down and standby mode displayed (see 1.2).
OFF mode: nothing.
3.1.4.2 Main Trim Menu
The Main Trim menu is shown when the SELECT button is pressed in the Channel Setting menu with Main Trim
as active sub-menu. The selected channel in the channel settings menu appears (in this example, Ch1) with
the current value (in this e1.00dB).
C
h
1
M
a
i
n
T
r
i
m
+
1
.
0
0
d
B
Actions
:
Rotary
:
UP/DOWN: changes the Main trim in steps of 0.125dB. The minimum setting
is -8.00dB and the maximum is +7.87dB.
Buttons
:
MENU: nothing.
BACK: the channel settings menu appears (see 3.1.4).
PRESET: If pressed briefly the current preset is displayed for two seconds. If
held for more than two seconds the preset menu appears (see 4).
SELECT: saves value and sends to selected channel. The channel settings
Summary of Contents for IB2S-A
Page 1: ...User Guide IB2S A Series TM Advanced Transmission Line ...
Page 2: ......
Page 45: ...ULTIMATE MONITORING ...
