menu appears (see 3.1.4).
MUTE: a mute/un-mute command is sent to all channels. The display
backlight flashes once per second when muted.
Clip
:
Nothing.
Trigger
:
ON mode: system shuts down and standby mode is displayed (see 1.2).
OFF mode: nothing.
3.1.4.3 LFE Source Menu
The LFE Source menu is shown when the SELECT button is pressed in the Channel Setting menu with LFE
Source as active sub-menu. The selected channel in the channel settings menu appears (in this example
Ch1). Which LFE source sub-menu option appears depends on the current LFE source (in this example
None).
C
h
1
:
L
F
E
S
o
u
r
c
e
N
o
n
e
Sub-menus
:
None, LFE AES3 Chan A, LFE AES3 Chan B, Analogue In.
Actions
:
Rotary
:
UP/DOWN: scrolls up/down through the sub-menu list.
Buttons
:
MENU: nothing.
BACK: the channel settings menu appears (see 3.1.4).
PRESET: If pressed briefly the current preset is displayed for two seconds.
If held for more than two seconds the preset menu appears (see 4).
SELECT: saves setting and sends to selected channel. The channel settings
menu appears (see 3.1.4).
MUTE: a mute/un-mute command is sent to all channels. The display
backlight flashes once per second when muted.
Clip
:
Nothing.
Trigger
:
ON mode: system shuts down and standby mode is displayed (see 1.2).
OFF mode: nothing.
3.1.4.4 LFE Trim Menu
The LFE Trim menu is shown when the SELECT button is pressed in the Channel Setting menu with LFE Trim as
the active sub-menu. The selected channel in the channel settings menu appears (in this example, Ch1)
and the current value appears (in this e1.00dB). There are no sub-menus.
C
h
1
:
L
F
E
T
r
i
m
+
1
.
0
0
d
B
Actions
:
Rotary
:
UP/DOWN: changes the Main trim in steps of 0.125dB. The minimum value is
-8.00dB and the maximum is +7.87dB.
Buttons
:
MENU: nothing.
BACK: the channel settings menu appears (see 3.1.4).
PRESET: If pressed briefly the current preset is displayed for two seconds.
If held for more than two seconds the preset menu appears (see 4).
SELECT: saves value and sends to selected channel. The channel settings
menu appears (see 3.1.4).
MUTE: a mute/un-mute command is sent to all channels. The display
backlight flashes once per second when muted.
Clip
:
Nothing.
Trigger
:
ON mode: system shuts down and standby mode is displayed (see 1.2).
OFF mode: nothing.
4 Preset Menu
The preset menu is shown whenever the PRESET button is pressed (unless in standby mode), or when the
BACK button is pressed in the preset setup menu. Which preset sub-menu option appears depends on the
last shown preset sub-menu option (this example shows the Preset Setup). An asterix means the name is
changeable by the user.
Summary of Contents for IB2S-A
Page 1: ...User Guide IB2S A Series TM Advanced Transmission Line ...
Page 2: ......
Page 45: ...ULTIMATE MONITORING ...