background image

Warranty Certificate

Please take a few moments to complete the warranty card at the back of this 
booklet (or register at www.pmc-speakers.com) as this not only records the 
purchase of your loudspeakers, but also provides you with an opportunity to make 
suggestions and provide feedback directly to PMC. 

Product Support

For product support, accessories or servicing advice, please contact  
a PMC authorised dealer. See www.pmc-speakers.com

© 2012 PMC.  All rights reserved.

This document should not be construed as a commitment on the part of PMC. The information it contains is 
subject to change without notice. PMC assumes no responsibility for any errors within this document.
CE Conformity: PMC active loudspeakers conform to CE Directive LVD 73/23/EEC and EMC 89/336/EEC. 
WEEE European directive: PMC Limited is a member of a National Compliance scheme and has gained the 

associated certification of compliance from the Environment Agency with the registration WEEE/GJ0101WU. 

WEEE EU Directive

This symbol on the product and in or on its packaging indicates that this product must not be disposed 
of with other household waste. It is the responsibility of the owner to dispose of waste equipment via a 
designated collection point for the recycling of waste electrical and electronic equipment. The recycling 
of waste equipment is an attempt to conserve natural resources and ensures that it is recycled in a manner 
that protects human health and the environment. For more information about where to dispose of waste 
equipment for recycling, please contact your local waste/recycling authority or the dealer from whom you 
purchased the product.

Company Details

PMC LIMITED

43-45  CRAWLEY GREEN ROAD  LUTON  LU2 OAA  UK

T  0870 4441044  F  0870 4441045
email:  [email protected]  web:  www.pmc-speakers.com

IMPORTANT

!

Summary of Contents for IB2S-A















































Reviews: