ATIKA ALA 2500, Original Instructions Manual, Page: 12 / 184

12
 Keep the operating instructions in a safe place for
future use.

Pass the operating instructions on to all persons
who work with the machine.
You may not start to operate the machine until
you have read these operating instructions,
observed all the instructions given and
installed the machine as described!
This machine must not be operated / used by
children, persons with restricted physical, sensory or
mental abilities or a lack of experience and/or know-
how or by persons who are not familiar with the
instructions.
The machine must not be operated by children or
young people under 16 years of age.
National and local regulations may determine a
different age restriction for the user.
Contents
Assembly 11
Extent of delivery 12
EC Declaration of Conformity 12
Symbols on the machine 12
Symbols in the operating manual 13
Operating times 13
Proper use 13
Residual risks 13
Safety instructions 13
Commissioning 15
Working with the garden shredder 16
Adjusting the fixed counter blade 16
Maintenance / Cleaning / Storage 17
Operational faults 18
Technical data 19
Guarantee 19
Spare parts 176
Extent of delivery

After unpacking, check the contents of the box

that it is complete

check for possible transport damage.
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
•
1 pre-assembled device unit
•
2 wheel covers
•
1 standing leg (left)
•
1 screw bag
•
1 standing leg (right)
•
1 collection sack
• 1 axle • 1 operating manual
• 2 wheels • 1 warranty declaration
EC Declaration of Conformity
No. (S-No.): 14716
according to EC directive: 2006/42/EC
We,
Altrad Lescha Atika GmbH
Josef-Drexler-Str. 8 – 89331 Burgau – Germany
herewith declare under our sole responsibility that the product
Gartenhäcksler (Garden Shredder) type / model ALA 2500
Serial number:
000001 – 025000
is conform with the above mentioned EC directive as well as with
the provisions of the guidelines below:
2014/30/EU, 2011/65/EU and 2000/14/EC+2005/88/EC.
Following harmonized standards have been applied:
EN 60335-1:2012+A11+A13+A1+A14+A2; EN 50434:2014;
EN 62233:2008; EN 55014-1:2006+A1; EN 55014-2:2015;
EN 61000-3-2:2014; EN 61000-3-11:2000
Conformity assessment procedure: 2000/14/EC - Appendix
V and 2005/88/EC.
Measured level of the acoustic output L
WA
90 dB (A).
Guaranteed level of the acoustic output L
WA
96 dB (A).
Keeping of technical documents at:
Altrad Lescha Atika GmbH – Technical department
Josef-Drexler-Str. 8 – 89331 Burgau – Germany
i.A.
Burgau, 21.04.2021 i.A. G. Koppenstein,
Engineering design management
Symbols on the machine
Carefully read the operating manual and
the safety instructions before starting the
machine and observe the instructions
when operating.
Switch off the machine and pull the mains
plug before performing settings, cleaning
the machine or if the cable is entangled or
damaged.
Danger – objects may be thrown out at
high speed when motor is running. Keep
bystanders, pets and domestic animals
out of the danger area.
Wait until all machine parts have come to
a dead stop before touching them.
Danger – rotating blades. Keep hands and
feet out of openings while machine is
running.
Wear eye and ear protection.
Wear protective gloves.