ATH-Heinl ATH W82 Page 47 User Manual Download

Page: 47 / 81

- 46 -

DECLARATION OF CONFORMITY

Declaration of conformity

For

Wheel balancer

Type

ATH W82

The following EG-directives are considered:

2006/42/EC (Machine-Directive)

The following harmonized standards are applied:

EN ISO 12100:2010

EN 60204-1:2006/AC:2010

Manufacturer:

ATH-Heinl GmbH &Co. KG

Kauerhofer Street 2

92237 Sulzbach-Rosenberg

GERMANY

Institute of Quality:

SGS Supervice Gözetme Etüd Kontrol Servisleri A.S.

Baglar Max. Osmanpasa Cad. No. 95

Is Istanbul Plaza, A Girisi

Günesli 34209 Istanbul

TURKEY

Reference number for the technical data:

TCF-MD-140526-048

Number of the certificate:

0263/IN-IST-14

502756/AOO/AKC

(OUCE 141003)

Herewith we confirm that the above-named machines are according to the named EC-directives.

ATH-Heinl GmbH &Co. KG

Kauerhofer Street 2

D-92237 Sulzbach-Rosenberg

GERMANY

in June 2014

Hans Heinl (General Manager)

ATH-Heinl GmbH & Co. KG

BY MODIFICATION AND / OR CHANGES TO THE MACHINE, THE CE EXAMINATION IS

EXCLUDED AND EXCLUDES ANY LIABILITY.

Summary of Contents for ATH W82







































































Search results

Summary of Contents for ATH W82

Reviews:

Related manuals for ATH W82

Brands by name

Popular brands

ATH-Heinl ATH W82, User Manual

Search results

Summary of Contents for ATH W82

Reviews:

Related manuals for ATH W82

Brands by name

Popular brands