© Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Printing errors and technical changing´s reserved / Version: 02/2017
- 21 -
Finally the arm can be connect on the specified
connection port on the balancer.
7.
Activate the width measuring gauge
Now you can activate the measuring device inside
the system.
Hereby press the F4
button in the
main menu.
Switch in the setting to point 7
“wheel width
device” by using the arrow keys
and change
to “Yes” by using the arrow keys
.
8.
Electrical connection
Please observe the general as well as the local regulations. Therefore, this step may only be carried
out by a trained specialist.
Pay attention to the necessary supply cable as well as the specified voltage (see technical data).
The main connection cable of the machine must be provided with a plug which corresponds to the
relevant standards. If the machine is connected directly (without a plug), it is recommended to secure the
circuit breaker for the balancer with a padlock so that only the appropriate personnel has access.
Connect the machine via its own connection and its own suitable circuit breaker.
Summary of Contents for ATH W82
Page 2: ...USER S MANUAL ATH W82 ...
