© Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Printing errors and technical changing´s reserved / Version: 02/2017
- 45 -
2.
Unscrew the engine mounting bolts.
3.
Move the motor by means of a tensioning screw, paying attention to the correct belt tension.
4.
Re-tighten the engine mounting bolts.
5.
Make sure that the belt does not run sideways.
6.
Replace the cover.
Change fuses
1.
Carefully remove the cover (weight tray).
2.
Remove the fuse from the power supply panel.
3.
Replace the new fuse with the old one using only fuses with the same values.
If the error persists, the ATH service should be contacted.
Summary of Contents for ATH W82
Page 2: ...USER S MANUAL ATH W82 ...
