© Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Printing errors and technical changing´s reserved / Version: 02/2017
- 42 -
MAINTENANCE
Reparation works are only allowed to be done by authorized service partners or, after consulting ATH, by
the customer.
Before maintenance and reparation works the machine must be switched off from the power
supply. (Main switch off, disconnect plug). There must be taken measures against switching on.
Works on the electrical parts respectively the supply lines are only allowed to be done by skilled
personal/technicians.
Error and remedy
The wheel balancer can display the following errors:
Error code
Reason
Err -1-
See service instruction
Err -2-
1. To less weight on the shaft
2. Balancing shaft is not fixed
3. Loosen wheel on the balancer
4. Loosen belt
Err -3-
To big unbalance of the wheel
Err -4-
Pressure sensor defect
Err -5-
Wheel cover not closed
Err -7-
Saved data’s are lost
Err -8-
100g counterweight missing
Pressure sensor defect
Power or main board is broken
Summary of Contents for ATH W82
Page 2: ...USER S MANUAL ATH W82 ...
