® Copyright by ATH-Heinl GmbH & Co. KG, 2014, All rights reserved /Misprint and technical changes reserved / Issue: 12/2014
- 22 -
I fit is a tubed tire the tube in the tire must now be correctly positioned. Pay
attention to that the tube is in that way positioned so that it won´t be damaged
during the further mounting.
The mounting of the second bead is to be made in the same way as
described for the first bead.
Here must also be paid attention to the correct position of the tire opposite of
the mounting head.
Now start the rotation of the turntable.
Pay attention to a correct bead run. An inobservance can lead to heavy
damages on the tire.
Finally loosen the rim clamping for removing the wheel.
Filling of a tire
The max. pressure of the tire may not be more then 3,5 bar.
Keep away parts of the body from the tire.
During operation the noise level can reach 85dB (A), therefore the operator should wear
corresponding protective clothing.