® Copyright by ATH-Heinl GmbH & Co. KG, 2014, All rights reserved /Misprint and technical changes reserved / Issue: 12/2014
- 20 -
If it is a tubed tire the tube should now be removed.
For levering out the lower tire bead lift the tire as far as it is at the same height
as the drop center of the rim.
Then position the tire lever between tire and mounting head and lift the tire
directly under the mounting head.
Lever now the tire bead over the rim and start the rotation in the same way as
with the upper bead.
After demounting press the pedal for swivelling back of the mounting tower so
that it turns back.
Now remove the wheel.
Mounting of a tire
The guidelines of WdK (Trade association of the German rubber industry) has to be observed when
mounting a tire.
The valve of the tire should be changed before mounting.
Clamp resp. adjust the rim in that way, so that the valve is positioned appr.
180° opposite the mounting head.
