® Copyright by ATH-Heinl GmbH & Co. KG, 2014, All rights reserved /Misprint and technical changes reserved / Issue: 12/2014
- 21 -
Coat the tire and the rim sufficiently with a tire bead lubricant.
Check if the mounting head is correctly adjusted to the rim.
If necessary adjust it as described in the subitem „Adjustment of mounting
head”.
Put now the tire slant on the rim so that the mounting head do not touch tire
parts while swiveling.
Swivel the mounting tower by pressing the corresponding pedal to the fore.
Position the tire so that the tire bead is under the nozzle but still on the
guideway of the mounting head.
However, please note that the tire opposite of the mounting head is in the
drop center of the rim.
Now start the rotation of the turntable.
Pay attention to a correct bead run. An inobservance can lead to heavy
damages on the tire.
