ATEN KA8270, User Manual, Page: 82 / 116

KVM over IP Console Station User Manual
70
Pull Configuration
To pull (retrieve) a configuration to your console station:
1. Enter the device’s IP address or IPv6 Address you wish to retrieve the con
-
figuration from.
Alternatively, you can mouse over the magnifying glass to find a list of the
devices on the same LAN and click the device’s IP or IPv6 address:
2. Enter the administrative username and password of the selected device.
3. Select the information you would like to retrieve to your console station by
checking the checkbox(es).
Note: Firmware files cannot be retrieved. If you check the Firmware
checkbox, the Pull button will not be available.
4. Click Pull to retrieve the information.
The console station will restart after successfully retrieving the
information.
Push Configuration
To push (deploy) a configuration from your console station:
Note: You can deploy the configuration / FW to multiple devices using
one procedure (shown below) instead of one procedure for every device.
1. Enter the device’s IP address(es) or IPv6 Address(es) you wish to deploy
the configuration to.
Alternatively, you can mouse over the magnifying glass to find a list of the
devices on the same LAN and click the device’s IP or IPv6 address: