background image

 Chapter 5. System Configuration

59

LDAP attribute is required for complete setup. LDAP attribute can be retrieved 
from the GET command using the Terminal interface. Please refer to 

Terminal

 

on page 71 for more details.

On the AD / LDAP server, users can be authenticated with any of the following 
methods:

With MS Active Directory schema.

Without schema – Only the Usernames used on the KVM over IP console 
station are matched to the names on the LDAP server. User privileges are 
the same as the ones configured on the switch.

Without schema – Only Groups in AD are matched. User privileges are the 
ones configured for the groups he belongs to on the switch.

Without schema – Usernames and Groups in AD are matched. User 
privileges are the ones configured for the User and the Groups he belongs 
to on the switch.

Note:

 For more information on configuring LDAP, you can download 

the full LDAP instructional manual from our website.

Finishing Up

After making any ANMS changes, be sure to click “Save” at the bottom of the 
configuration page.

Admin DN

Consult the AD / LDAP administrator to ascertain the appropriate 
entry for this field. For example, the entry might look like this:
ou=kn8132,dc=aten,dc=com

Admin Name

Key in the administrator username.

Password

Key in the administrator password.

Search DN

Set the distinguished name of the search base. This is the domain 
name where the search starts for user names.

Item

Action

Summary of Contents for KA8270





















































































































Reviews: