Chapter 5. System Configuration
65
5. Navigate to the directory that the new firmware file is in, click to select the
file and click “Open”.
The file will be displayed in the
Filename
field of the configuration page
as shown below:
6. Click Upgrade Main Firmware to start the upgrade procedure.
If you enabled
Check Main Firmware Version
the current firmware
level is compared with that of the upgrade file. If the current version is
equal to or higher than the upgrade version, a popup message appears,
to inform you of the situation and stops the upgrade procedure.
If you didn't enable
Check Main Firmware Version
, the upgrade file is
installed without checking what its level is.
Upgrade progress information is shown in a
Progress
bar.
Once the upgrade completes successfully, the console station will
restart.
7. Log in again and check if the firmware version is the newest one.
Summary of Contents for KA8270
