ATEN CN8000A, User Manual

Page: 60 / 207

CN8000A User Manual
46
IPv6 Settings
The CN8000A can have its IPv6 address assigned dynamically at boot-up
(DHCP), or it can be given a fixed IP address.
Š
For dynamic IP address assignment, select the Obtain IPv6 address
automatically [DHCP] , radio button. (This is the default setting.)
Š
To specify a fixed IP address, select the Set IPv6 address manually [Fixed
IP] , radio button and fill in the IPv6 Address, Subnet Prefix Length and
Default Gateway.
Note: If the CN8000A is on a network that uses DHCP to assign network
addresses, and you need to ascertain its IP address, see IP Address
Determination , page 165, for information.
„
DNS Server
The CN8000A can either have its DNS server address assigned automatically,
or a fixed address can be specified.
Š
For automatic DNS Server address assignment, select the Obtain DNS
server address automatically , radio button.
Š
To specify a fixed address, select the Set DNS server address manually ,
radio button and fill in the required information.
Note: Specifying an alternate DNS Server address is optional.