[7]
Entrance to Programming Mode and Setting Menu:
If you press and hold PROG ( ) button, while the instrument is in Operating Mode, then the display will
show “
prog
”. If you press UP ( ) button, while you hold PROG ( ) button, the instrument will enter
Programming Mode and the Setting Menu, and the display will show “
INPUT
", first item of the Setting
Menu.
If password protection is active, then the display will show “
pass
” after “
PROG
”, and the instrument will
ask for password before entering Programming Mode. Password can be entered by adjusting the
parameter value on the display with UP ( ), DOWN ( ), and LEFT ( ) buttons. After adjusting
parameter value on the display, press PROG ( ) button to enter the password. If the password is correct,
then the instrument will be in Programming Mode, and the display will show “
true
” message, and
afterwards “
INPUT
”, first item of Setting Menu. If the password is incorrect, then the display will show
“
FALSE
”. The instrument will still enter the Setting Menu, but the user won’t be able to make any changes.
Setting Menu will be read-‐only.
There are 4 submenus in the Setting Menu:
INPvT
:
Input sensor settings
OvTPvT
:
Relay output settings
CALIB
:
Calibration and sensor limit settings
SECURE
:
Security settings
You can switch between submenus in the Setting Menu with UP ( ) and DOWN ( ) buttons, and enter
the submenu with PRG ( ) button. Once you enter a submenu, you’ll see the parameters related to that
submenu. You can switch between parameters in the submenus with UP ( ) and DOWN ( ) buttons. If
you want to change a parameter, press PRG ( ) button, while the name of the parameter is in the
display. Adjust the parameter value with UP ( ), DOWN ( ) and LEFT ( ) buttons, and save it by
pressing PRG ( ) button. If you want to exit without saving
the parameter value, press ESC ( ) button
while adjusting the parameter, and you’ll return to the related submenu.
4. INSTRUMENT SETTINGS
prog
˝Input
prog
˝pass
0
faLse
true
›Input
If password is incorrect:
If password is correct:
›Input
˝Inpvt
˝Ovtpvt
˝CaLIb
˝seCvre
Setting Menu
prog
