[9]
Set Values for output relays are entered through Output Menu in Programming Mode (see 4.2.1 Entering
Set Value p. 11). If password protection for Programming Mode is active (see 4.4.1 Setting Password
Protection p. 20), the user cannot change Set Values without knowing the password. Left Function allows
the user to enter Set Values directly while the instrument is working in Operating Mode, without entering
Programming Mode. Therefore, Set Values can be entered with Left Menu, while the password protection
for Programming Mode is active.
In order to activate Left Function, enter Setting Menu by pressing PRG ( ) and UP ( ) buttons. First
submenu in the Setting Menu is Input Menu, so the display will show “
INPUT
”. Press PRG ( ) button to
enter Input Menu. First parameter in the Input Menu is “
SENSOR
”. Press UP ( ) button, and the display
will show “
Left
”. Press PRG ( ) button to enter Left Function settings. The display will show the current
setting for Left Function. In order to change the setting for Left Function, press PRG ( ) button again,
and the display will start flashing. Use UP ( ) and DOWN ( ) buttons to in order to change the setting,
and PRG ( ) button to save the setting. If display shows “
On
”, Left Function is active. If the display shows
“
OFF
”, Left function is disabled. If you want to exit without saving the setting, press ESC ( ) button while
the display is flashing.
prog
˝Inpvt
Left
On
Off
4.1.2.
Entering Set Value While Password Protection is Active
(left)
sensor
Left Function Settings
