[20]
ALP94 provides Password Protection against unauthorized entrance to the Setting Menu. When active,
Password Protection will ask a password before entering to Setting Menu. If password is correctly entered,
the user is allowed to change the settings of the instrument. If password is incorrect, the instrument will
still enter the Setting Menu, however the instrument will not allow the user to make any changes. The
default Master Password is “
456
”. If you forget your password, you can use this to enter the Setting Menu.
First step of setting Password Protection is creating a password. In order to create a password, you should
first enter to Setting Menu by pressing PRG ( ) and UP ( ) buttons. The display will show the first
submenu in Setting Menu, “
INPvT
”. Press DOWN ( ) button, and the display will show “
SeCvre
”. Press
PRG ( ) button to enter Security Menu. Press UP ( ) button once, and the display will show “
PASS
”.
Press PRG ( ) button to create a password. The display will show a flashing “
0
”. Enter your preferred
password by using UP ( ), DOWN ( ) and LEFT ( ) buttons, then press PRG ( ) button to save it.
If you want to exit without saving, use ESC ( ) button.
Now, you have a new password.
Second step of setting Password Protection is activating the Protection. In order to activate Protection
from Operating Mode, you should first enter to Setting Menu by pressing PRG ( ) and UP ( ) buttons.
The display will show the first submenu in Setting Menu, “
INPvT
”. Press DOWN ( ) button, and the
display will show “
SeCvre
”. Press PRG ( ) button to enter Security Menu. The display will show
“
PROTEC
”. Press PRG ( ) button to see the current setting for Protection. Press PRG ( ) button again
to change to setting. The display will start flashing. Use UP ( ) or DOWN ( ) buttons to change the
setting, and press PRG ( ) button to save the setting. If you set “
PROTEC
” as “
ON
”, Protection will be
activated. If you set “
PROTEC
” as “
OFF
”, Protection will be disabled. If you want to exit without saving, use
ESC ( ) button.
Use UP and DOWN buttons
to increase the flashing
digit, and use LEFT button
to go to next digit.
4.4 SECURITY MENU
4.4.1.
Setting Password Protection
(protec, pass)
pass
0
pass
proteC
faC
.
def
.
Security Menu
prog
˝SECvre
˝Inpvt
prog
˝SECvre
˝Inpvt
Security Menu
...
...
New Password
prog
˝SECvre
˝Inpvt
Security Menu
...
PROTEC
PROTEC PROTEC
Password Protection
