Atec 8000, Operation And Maintenance Manual, Page: 37 / 80

Atmospheric Technology 31
8. Model 8000 Parts List
Components of the Model 8000 are shown in the following Parts List. This list does
not include common parts such as fuses, fittings, or fasteners.
Chassis
8000-100-1
Front Panel 8000-100-2
Rear Panel 8000-100-3
Mass Flow Controller (Specify Range) 8000-200-1
Cartridge Tubing Set
8000-200-4
Cartridge Filter Holder 8000-200-5
Cartridge Filter (47mm Teflon) 8000-200-6
Ozone Scrubber Heater (Complete) 8000-200-10
Ozone scrubber (KI copper coil) 8000-200-11
Heater Relay 8000-300-1
Vacuum Pump 8000-200-12
Vacuum Pump Relay 8000-300-2
2-Way Solenoid Valve 8000-200-13
Single Board Computer 8000-400-1
GPIO Board 8000-400-2
Interface Board 8000-400-3
Temperature Probe 8000-400-4
Power Supply 8000-300-3
Cooling Fan 8000-300-4
Power Switch 8000-300-5
Fuse Holder 8000-300-6
Pump Fan Guard 8000-500-1
Cooling Fan Guard 8000-500-2
Vacuum Line Tubing Set 8000-200-16
MFC Cartridge Ch.1 Cable 8000-700-3
MFC Cartridge Ch.2 Cable 8000-700-4