AT&T OneVision DEFINITY G3 Guide, Installation And Connection Manual

Page: 223 / 287

Issue 2 April 1996
10-15
Alarms
Set the Modem Options for Alarm Forwarding
Set the Modem Options
for Alarm Forwarding
Introduction This section describes how to set modem options for the AT&T
3715 modem that is certified for alarm forwarding.
Procedure Start at the UNIX prompt.
Step Action
1 Use a UNIX editor to open the following file:
etc/uucp/Devices
2 Add (or edit) the following line:
ACU term/a01m, - 1200 direct_modem
3 Write and quit the file.
4 Enter the following command:
cu -1 /dev/ttya01m
5 Enter the following to connect to the modem:
at
Result: The modem responds with an
OK
prompt.
6 Enter the following modem option.
AT&F
Result: The modem responds with an
OK
prompt. This
option sets the modem to its default setting. (The
required options are set in the Dialers script file.)
End