AT&T OneVision DEFINITY G3 Guide, Installation And Connection Manual, Page: 105 / 287

Issue 2 April 1996
5-27
Planning Connectivity
Cables and Connectors
Cables and Connectors
Materials
needed To connect your PC to a modem, data module, or ADU, you need
the following cable:
If your cable does not have the appropriate gender connectors,
use a gender changer to make the correct cable configuration.
Serial I/O
ports cards To connect a certified UnixWare PC (using Serial I/O ports cards)
to a certified modem, data module or ADU, connect a Serial I/O
cable to a Serial I/O modular adapter.
See also For sample design configurations with Serial I/O cables and
adapters, see Appendix B.
Procedure Use the following steps to connect a certified PC that uses the
standard serial ports to a certified modem, data module, or ADU.
Communications
Hardware
Cable Connector
modem
data module RS232 (M25B) PC end: 25-pin female
connector
Data module or modem
end: 25-pin male
connector
ADU Moss adapter PC end: female
connector