AT&T OneVision DEFINITY G3 Guide, Installation And Connection Manual, Page: 219 / 287

Issue 2 April 1996
10-11
Alarms
Set Modem Options for Alarm Reception
Procedure 2:
2224 CEO
modem Start at the UNIX prompt.
Step Action
1 Use a UNIX editor to open the following file:
etc/uucp/Devices
2 Add (or edit) the following line:
ACU term/a01m, - 1200 direct_modem
3 Write and quit the file.
4 Enter the following command:
cu -1 /dev/ttya01m
5 Connect to the modem and reset the software options
to their default settings.
6 On the front panel of your modem, set dip switch #6 to
the up position.
7 Enter the following modem options:
od
o2=n
o1 2=y
o34= 1
o36=0
o41=0
8 On the front panel of your modem, set dip switch #1 to
the up position.
Hint: Dip switches 1 and 6 are now in the up position.
All others must be in the down position.
End