AT&T OneVision DEFINITY G3 Fault Management and integration User Manual Download Page 139

Page: 139 / 153

Switch View Messages

Issue 2 April 1996

9-3

3. Set the refresh on startup option to TRUE. This will cause the

application to request the Proxy Agent to refresh all of its cached
data.

4. Restart the ap plication.

ERROR: Circuit Pack Refresh failed.

Description: The circuit pack refresh has failed.

Action: Try the following procedure.

1. Check to see whether the connection between the Proxy Agent and

the PBX is up, and that the Proxy Agent is running and
communicating with the NMS.

2. Make sure that the PBX is in the Proxy Agent’s clients screen.

3. Set the refresh on startup option to TRUE. This will cause the

application to request the Proxy Agent to refresh all of its cached
data.

4. Restart the ap plication.

ERROR: Could Not Get <MIB object> from Agent

Description: An error was received when the application requested the
specified data from the PBX. This can occur when you request data for an
unassigned port, or if the connection between the PBX and the Proxy
Agent is down.

Action: Try the following procedure.

1. Check to see whether the connection between the Proxy Agent and

the PBX is up, and that the Proxy Agent is running and
communicating with the NMS.

2. Make sure that the PBX is in the Proxy Agent’s clients screen.

3. Set the refresh on startup option to TRUE. This will cause the

application to request the Proxy Agent to refresh all of its cached
data.

4. Restart the ap plication.

ERROR: Incompatible switch types cannot continue.

Description: The switch type indicated by the systemObjectID from the
Proxy Agent’s client screen and the switch vintage data are not
compatible.

Action: Change the switch type on the Proxy Agent’s clients screen to be
compatible with the actual switch type.

ERROR: No Cabinet Data Received.

Description: No cabinet data was received from the Proxy Agent. The
Fault Management application cannot run further.

Summary of Contents for OneVision DEFINITY G3 Fault Management and integration


























































































































































Search results

Summary of Contents for OneVision DEFINITY G3 Fault Management and integration

Reviews:

Related manuals for OneVision DEFINITY G3 Fault Management and integration

Brands by name

Popular brands

AT&T OneVision DEFINITY G3 Fault Management and integration, User Manual

Search results

Summary of Contents for OneVision DEFINITY G3 Fault Management and integration

Reviews:

Related manuals for OneVision DEFINITY G3 Fault Management and integration

Brands by name

Popular brands