AT&T OneVision DEFINITY G3 Fault Management and integration User Manual Download Page 123

Page: 123 / 153

How to Enter Search Criteria

Issue 2 April 1996

7-13

How to Search for a Range

You can search for a range of values for up to three fields in any table. You
search for a range by entering data into the following fields:

Click on an icon for examples of how to search for a range of values.

Field

What you enter

Table to Search

The name of the table in the database

Field Name

The name of the field in the table

Comparison

Range

Value

The lower end of the range.

If you leave this field blank, Report Builder
searches for all data equal to or less than
the entry in the To Value field.

To Value

The upper end of the range.

If you leave this field blank, Report Builder
searches for all data equal to or greater
than the entry in the Value field.

Table 7-6.

A Range Between Two Values

Range between two values

This example shows how to find all the ports that reported any errors during
the last twelve hours.

Summary of Contents for OneVision DEFINITY G3 Fault Management and integration


























































































































































Search results

Summary of Contents for OneVision DEFINITY G3 Fault Management and integration

Reviews:

Related manuals for OneVision DEFINITY G3 Fault Management and integration

Brands by name

Popular brands

AT&T OneVision DEFINITY G3 Fault Management and integration, User Manual

Search results

Summary of Contents for OneVision DEFINITY G3 Fault Management and integration

Reviews:

Related manuals for OneVision DEFINITY G3 Fault Management and integration

Brands by name

Popular brands