Hood control
If you own a compatible RF enabled hood, it can be connected to your induction hob. To pair and
customize the behaviour of your hood see chapter: Settings. Parameter hth (Hob to Hood) is used
for pairing, while Hst and Hsc effect the behaviour of your hood so you can customize it according
to your kitchen habbits.
Switching extraction on and off
•
Press the key
for a higher fan setting. Press and hold the key
for 1 second to select the highest setting.
•
Press the key
to select a lower setting.
Switching the light on and off
•
Press the light key
. The light switches on at maximum strength.
•
To turn off the light, press the key
again.
•
Press and hold the light key
to set the lighting intensity.
Changing the colour lighting temperature
You can adjust the lighting temperature.
•
Press the light key
together with the
key to make the light ‘colder’ or the light key together
with the
key to make the light ‘warmer’.
Synchro Start (Settings)
This setting allows the induction hob to automatically activate the lights of the connected hood every
time the induction hob is turned on. Depending on the value you set, the ventilation will automatically
start at that speed level when any cooking zone is activated.
Synchro Control (Settings)
In addition to Synchro Start the hood will be controlled automatically depending on the current highest
activated cooking level.
Synchro Stop (Settings)
The lights will be switched off together with the hob and the fan will, with a delay, also be switched
off.
NOTE!
When Synchro Control (see chapter Settings) is enabled a manual operation will deactivate
Synchro Control temporarily (hood icons will turn from being dimmed to lit). The function is active
again when the hob is switched on next time.
31
Operation
