English
34
Fig. 18.3
Fig. 18.4
6.5.6 Settings
See Annex A.
6.5.7 Language setup
To change the display language press PRG for 5 seconds,
enter the password 3211. Once the menu appears,
press the START button under GENERAL. Scroll to the
“Language” setting and select the desired language
from those available: 1=IT, 2=EN, 3=DEU, 4=FR, 5=SP,
6=POR, 7=SW.
6.5.8 USB stick management:
When the USB key is plugged in the machine, the
following message appears after a few seconds:
Fig. 19.1
When the USB key is removed from the machine, after
a few seconds the following message appears.
Fig. 19.2
6.6 Alarms
See Annex B.
6.7 Warnings
See Annex C.
7 Maintenance
7.1 General information
Maintenance is a set of periodic and predefined
operations aimed at maintaining the machine
functionality in all its aspects as a result of intrinsic
wear and use.
The routine maintenance operations are described
below. It should be remembered that the lower
operating cost and a long life of the machine depend
on the continuous observance of what is reported in
this manual.
