English
14
A label (Fig. 6) is placed outside the packaging that
indicates:
A) Minimum and maximum temperature of the
storage environment;
B) Minimum and maximum humidity of the storage
environment;
C) Minimum and maximum pressure of the storage
environment;
D) “High” position indicators;
E) Glass indicating “Fragile” material;
F) Keep the packaging dry;
G) A maximum of two machines can be stacked;
H) Do not overturn the packaging with the machine
inside;
I) It is strictly forbidden to use hooks for handling the
packaged machine.
- Handle the packaged machine only with forklift truck
or pallet trucks with forks (Fig. 5a).
- Remove the “hat” container (A) extracting it from the
top (Fig. 5b).
- Handle the machine with appropriate trolley. Lock the
machine on the trolley with a sturdy belt (B Fig. 5c)
Do not lift the machine by grasping it from the
protruding points, such as the control panel. They
may be damaged or detached. With some metal
components there is a danger of injury or cuts.
a
WARNING. Wear cut-resistant protective
gloves during manual transport and
positioning of the machine.
Inside the packaging, in addition to the machine, there
are:
- the instructions for use manual
- the two spray arms that will be applied on the tank;
- the flexible hoses for hydraulic connections (hot
water and cold water / purified water);
- the drain pipe.
If the machine is to be moved, it is advisable to keep the
packaging for any other relocation.
If this is not provided, dispose of the packaging
materials: cardboard, polystyrene and other, separated
by single material, sending them to the most
appropriate final destination, which may be recovery or
storage in landfills.
4.1 Storage
If the packaged machine is temporarily stored, make
sure that it is not subjected to blows and tampering.
However, it must be placed in a closed, dry, dust-free
environment and protected from atmospheric agents.
When restored, a careful preliminary examination of its
integrity by specialised personnel is necessary.
Absolutely avoid overlapping weights or foreign bodies
on the packaging and the machine.
5 Installation
It is advisable that only furniture for professional use
be positioned in the area around the machine, to avoid
ruining them due to possible leakage of condensation
water.
b
HAZARD: Do not install and/or use the
thermodisinfector in environments with
flammable/explosive atmosphere.
a
Make sure that the floor is fit to support the
load of the equipment when in operation,
equal to 70 Kg.
a
Make sure that the machine is perfectly
vertical and stable, using a spirit level, if
necessary.
Unevenness of the machine surface and height can be
adjusted with the four adjustable feet placed under the
machine itself.
There are two models of thermodisinfector (see Fig. 2):
The TT model is the classic model of thermodisinfector
with small-sized product bowls, which can be positioned
on any piece of furniture capable of withstanding its
weight, within a dental practice.
The UC model is a thermodisinfector with much more
capable product bowls than the AWD655-2 version and
which, usually, is embedded under a piece of furniture
where appropriate space is already provided, within a
dental practice.
b
HAZARD. All electrical and water connections
(loading/unloading) can only be carried out
by specialised and authorised personnel and
by consulting the relative diagrams.
Before machine positioning make sure that:
All the components needed for installation and proper
use of the machine were installed: main switch, water
supply taps, drain and anything else needed. These
components should have all the needed features and
should be installed at the locations shown on the
installation scheme.
