Asus Z11PA-D8 Series User Manual Download Page 45

Page: 45 / 158

2-27

Z11PA-D8 Series

USB 2.0 connector (10-1 pin USB78)

This connector is for USB 2.0 ports. Connect the USB module cable to the connector,

and then install the module to a slot opening at the back of the system chassis. The

USB connectors comply with USB 2.0 specification that supports up to 480 Mbps

connection speed.

USB 3.0 connector (20-1 pin USB3_12)

This connector allows you to connect a USB 3.0 module for additional USB 3.0 front

or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of

USB 3.0 including faster data transfer speeds of up to 5Gbps, faster charging time for

USB-chargeable devices, optimized power efficiency, and backward compatibility with

USB 2.0.

Summary of Contents for Z11PA-D8 Series































































































































































Search results

Summary of Contents for Z11PA-D8 Series

Reviews:

Related manuals for Z11PA-D8 Series

Brands by name

Popular brands

Asus Z11PA-D8 Series, User Manual

Search results

Summary of Contents for Z11PA-D8 Series

Reviews:

Related manuals for Z11PA-D8 Series

Brands by name

Popular brands