Asus Z11PA-D8 Series User Manual Download Page 43

Page: 43 / 158

2-25

Z11PA-D8 Series

2.8.2

Internal connectors

Mini-SAS HD connector (ISATA1-2; ISSATA1; MVSATA1)

This motherboard comes with mini Serial Attached SCSI (SAS) HD connectors, the

storage technology that supports Serial ATA. Each connector supports up to four

devices.

Micro SD card slot (MSD1)

Your motherboard supports SD Memory Card v2.00 (SDHC) / v3.00 (SDXC).

Some memory cards may not be compatible with your motherboard. Ensure that you use

only compatible memory cards to prevent loss of data, damage to your device, or memory

card, or both.

Disconnect all power (including redundant PSUs) from the existing system before you add

or remove a Memory Card, then reboot the system to access the Memory Card.

Summary of Contents for Z11PA-D8 Series































































































































































Search results

Summary of Contents for Z11PA-D8 Series

Reviews:

Related manuals for Z11PA-D8 Series

Brands by name

Popular brands

Asus Z11PA-D8 Series, User Manual

Search results

Summary of Contents for Z11PA-D8 Series

Reviews:

Related manuals for Z11PA-D8 Series

Brands by name

Popular brands