Asus Z11PA-D8 Series User Manual Download Page 124

Page: 124 / 158

5-18

Chapter 5: RAID Configuration

5.4 Intel

Virtual Raid on CPU in BIOS

This feature requires a KEY module to enable CPU RAID functions with Intel

CPU RSTe.

•

The KEY module is purchased separately.

•

Refer to section

2.8.2 Internal connectors

for the location of the VROC_HW_KEY

connector.

Due to hardware design, your motherboard does not support CPU RAID configurations as

OS drives.

To enter the Intel

Virtual Raid on CPU in BIOS:

Enter the BIOS Setup during POST.

Go to the

Advanced

Intel(R) Virtual Raid on CPU

All Intel VMD

Controllers

then press <Enter> to display the Intel

Virtual Raid on CPU menu.

Refer to Chapter 4 for details on entering and navigating through the BIOS Setup.

Due to chipset limitation, when SATA ports are set to RAID mode, all SATA ports run at

RAID mode together.

Summary of Contents for Z11PA-D8 Series































































































































































Search results

Summary of Contents for Z11PA-D8 Series

Reviews:

Related manuals for Z11PA-D8 Series

Brands by name

Popular brands

Asus Z11PA-D8 Series, User Manual

Search results

Summary of Contents for Z11PA-D8 Series

Reviews:

Related manuals for Z11PA-D8 Series

Brands by name

Popular brands