Asus TS700-X7/PS4 User Manual Download Page 52

Page: 52 / 200

2-30

Chapter 2: Hardware setup

Ensure that no cables or

components are obstructing the

fan duct.

Installation

1. Orient the fan duct as shown, aligning

the three (3) screw holes with the

designated screw holes on the

motherboard.

2. Secure the fan duct with three screws.

Removal

1. Remove the three (3) screws

that secure the fan duct to the

motherboard.

2. Carefully pull-out the fan duct out of

the chassis.

Chapter 2

2.9.3

Fan Duct

This server system comes with a motherboard fan duct to enable better air flow

inside the motherboard while the system is running.
To install the fan duct on the motherboard, refer to the illustration below.

Summary of Contents for TS700-X7/PS4









































































































































































































Search results

Summary of Contents for TS700-X7/PS4

Reviews:

Related manuals for TS700-X7/PS4

Brands by name

Popular brands

Asus TS700-X7/PS4, User Manual

Search results

Summary of Contents for TS700-X7/PS4

Reviews:

Related manuals for TS700-X7/PS4

Brands by name

Popular brands