Asus TS700-X7/PS4 User Manual Download Page 145

Page: 145 / 200

TS700-X7/PS4

6-23

Chapter 6

6.3

Intel

Rapid Storage Technology enterprise SATA

Option ROM Utility

The Intel® Rapid Storage Technology enterprise SATA Option ROM utility allows

you to create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 sets from Serial

ATA hard disk drives that are connected to the Serial ATA connectors supported by

the Southbridge.

To use onboard SATA ports:

1. Install all the Serial ATA hard disk drives.
2. Turning on the system. During POST, press <Del>. to enter BIOS. Go to

Advanced Menu

PCH SATA Configuration

SATA Mode

, then press

<Enter>.

3. Set

SATA Mode

RAID Mode

and save, then reboot system.

4. During POST, press <Ctrl> + <I> to display the utility main menu.

Summary of Contents for TS700-X7/PS4









































































































































































































Search results

Summary of Contents for TS700-X7/PS4

Reviews:

Related manuals for TS700-X7/PS4

Brands by name

Popular brands

Asus TS700-X7/PS4, User Manual

Search results

Summary of Contents for TS700-X7/PS4

Reviews:

Related manuals for TS700-X7/PS4

Brands by name

Popular brands